Hallo zusammen, im Anhang seht ihr wie der Brief aussehen kann. Ist noch nicht so schön formatiert, aber mit der Ellenlangen Absenderadresse (Free Software Foundation Europe, Fellowship Gruppe Zürich) ist es auch etwas schwierig.
Offene Punkte: - Wer ist Ansprechperson (resp. Absenderadresse?) - Wo ist der einzufuegende Text? - Kann noch nicht deutsche Adressen filtern.
Wenn ihr den Brief selber generieren wollt: Adressdatei muss utf8 codiert vorliegen. Es empfiehlt sich nur ein paar wenige auszuwählen, ansonsten dauert das kompilieren eine Ewigkeit.
Grüsse Urs
Hoi Urs
On 2014-05-18, Urs Fässler wrote:
- Kann noch nicht deutsche Adressen filtern.
Hast Du mein Mail an diese Gruppe vom 11. Mai nicht gesehen? Dort hatte ich nach deutschsprachigen Personen gefiltert.
Oder meinst Du was anderes?
Gruss Elias
Hm, habs gar nicht so genau angeschaut. Waere einfach elegant, wenn es gleich im LaTeX file gehen wuerde.
Gruesse Urs
Am Sonntag, den 18.05.2014, 18:28 +0200 schrieb Elias Diem:
Hoi Urs
On 2014-05-18, Urs Fässler wrote:
- Kann noch nicht deutsche Adressen filtern.
Hast Du mein Mail an diese Gruppe vom 11. Mai nicht gesehen? Dort hatte ich nach deutschsprachigen Personen gefiltert.
Oder meinst Du was anderes?
Gruss Elias
Hoi Urs
On 2014-05-18, Urs Fässler wrote:
Hm, habs gar nicht so genau angeschaut. Waere einfach elegant, wenn es gleich im LaTeX file gehen wuerde.
Aha. Ok, da kann ich nicht helfen...
Gruss Elias
Hoi Urs.
im Anhang seht ihr wie der Brief aussehen kann. Ist noch nicht so schön formatiert, aber mit der Ellenlangen Absenderadresse (Free Software Foundation Europe, Fellowship Gruppe Zürich) ist es auch etwas schwierig.
Offene Punkte:
- Wer ist Ansprechperson (resp. Absenderadresse?)
Kannst du mich nehmen.
FSFE Schweiz Marcus Möller Stampfenbachstrasse. 69
8092 Zürich
- Wo ist der einzufuegende Text?
Hier ist ein Vorschlag des eigentlichen Pakt Textes. Dazu käme natürlich noch ein Anschreiben, dass den Inhalt erklärt.
https://pad.fsfe.org/p/freier-software-pakt-text
Der Text ist nur ein Vorschlag und kann angepasst/ersetzt/verbessert werden.
@Elias würdest du das Anschreiben formulieren und einen Entwurf auf die Liste schicken?
- Kann noch nicht deutsche Adressen filtern.
Wenn ihr den Brief selber generieren wollt: Adressdatei muss utf8 codiert vorliegen. Es empfiehlt sich nur ein paar wenige auszuwählen, ansonsten dauert das kompilieren eine Ewigkeit.
Viele Grüsse Marcus Möller
Hoi zäme
On 2014-05-26, Marcus Möller wrote:
@Elias würdest du das Anschreiben formulieren und einen Entwurf auf die Liste schicken?
Kann ich machen. Wird wahrscheinlich Ende Woche...
Hallo
Am 2014-05-26 18:08, schrieb Marcus Möller:
snip
- Wo ist der einzufuegende Text?
Hier ist ein Vorschlag des eigentlichen Pakt Textes. Dazu käme natürlich noch ein Anschreiben, dass den Inhalt erklärt.
https://pad.fsfe.org/p/freier-software-pakt-text
Der Text ist nur ein Vorschlag und kann angepasst/ersetzt/verbessert werden.
Ich habe den Text nun ein zweites Mal bearbeitet. Aus meiner Sicht müssen nur noch die durchgestrichenen Passagen und die Kommentare entfernt werden. Optional könnte man bei Zeit und Lust eine Konsistenzprüfung bezüglich der leidigen nicht-Diskriminierungsgeschichte (männlich/weiblich) machen. Wollen wir den Text so wie er ist verabschieden?
Gruss, Sämi
Hoi zäme
On 2014-05-29, Samuel Bächler wrote:
Ich habe den Text nun ein zweites Mal bearbeitet. <snip/>
Also das Doppel-S durch ss ersetzen?
Am 29.05.2014 15:55, schrieb Elias Diem:
Hoi zäme
On 2014-05-29, Samuel Bächler wrote:
Ich habe den Text nun ein zweites Mal bearbeitet. <snip/>
Also das Doppel-S durch ss ersetzen?
Die Kommentare und Anmerkungen könnt ihr ruhig entfernen. Ich denke sie sind für alle akzeptierbar.
Viele Grüsse Marcus
Im Anhang die aktuelle (nicht fertige) Version.
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
@Marcus: wie deine FSFE-EMail? wirkt etwas besser wenn diese dort steht.
Gruesse Urs
Am Donnerstag, den 29.05.2014, 16:18 +0200 schrieb Marcus Möller:
Am 29.05.2014 15:55, schrieb Elias Diem:
Hoi zäme
On 2014-05-29, Samuel Bächler wrote:
Ich habe den Text nun ein zweites Mal bearbeitet. <snip/>
Also das Doppel-S durch ss ersetzen?
Die Kommentare und Anmerkungen könnt ihr ruhig entfernen. Ich denke sie sind für alle akzeptierbar.
Viele Grüsse Marcus
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Ist für mich so ok, @Urs könntest du das bitte noch einbauen?
Viele Grüsse Marcus
So, wenn niemand was auszusetzen hat wäre es das :)
@Marcus: Ist die EMail-Adresse noch in Verwendung? Ev. solltest du noch schnell prüfen ob die Anschrift wirklich in das Sichtfenster passt.
Am Sonntag, den 01.06.2014, 16:12 +0200 schrieb Marcus Möller:
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Ist für mich so ok, @Urs könntest du das bitte noch einbauen?
Viele Grüsse Marcus
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Kleine Anmerkung
Sollte man nicht statt :
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie auffordern, sich in dieser Funktion über freie Software Gedanken zu machen.
besser:
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie bitten, sich in dieser Funktion über freie Software Gedanken zu machen.
Schreiben? Wäre etwas höflicher.
Grüsse Michel
Am 01.06.2014 16:10, schrieb Elias Diem:
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Am 02.06.2014 12:41, schrieb Michel:
Kleine Anmerkung
Sollte man nicht statt :
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie auffordern, sich in dieser Funktion über freie Software Gedanken zu machen.
besser:
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie bitten, sich in dieser Funktion über freie Software Gedanken zu machen.
Schreiben? Wäre etwas höflicher.
Klingt gut ;)
Was war eigentlich mit dem Rückantwortschrieb? Ich fände es eigentlich gut wenn man den Pact direkt unterschrieben in einen Briefumschlag mit Fenster stecken könnte, um ihn zurückzuschicken.
Viele Grüsse Marcus
Grüsse Michel
Am 01.06.2014 16:10, schrieb Elias Diem:
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Am 02.06.2014 12:42, schrieb Marcus Moeller:
Am 02.06.2014 12:41, schrieb Michel:
Kleine Anmerkung
Sollte man nicht statt :
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie auffordern, sich in dieser Funktion über freie Software Gedanken zu machen.
besser:
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie bitten, sich in dieser Funktion über freie Software Gedanken zu machen.
Schreiben? Wäre etwas höflicher.
Klingt gut ;)
Was war eigentlich mit dem Rückantwortschrieb? Ich fände es eigentlich gut wenn man den Pact direkt unterschrieben in einen Briefumschlag mit Fenster stecken könnte, um ihn zurückzuschicken.
Andreas hat noch den Hinweis gegeben, dass den Term schweizer regierung kaum jemand nutzt, mitglied des bundesrates waer ueblicher.
Viele Grüsse Marcus
Grüsse Michel
Am 01.06.2014 16:10, schrieb Elias Diem:
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Bundesrat aber nur, wenn damit die Sieben gemeint sind. Ansonsten schreibt man explizit vom National- bzw. Ständerat. Das wäre dann noch ein Feld, dass sich automatisch ausfüllen liesse.
Zudem, "Schweizer..." würde ich weg lassen. Der Text suggeriert sonst er käme aus dem Ausland.
Sollte der Bedarf bestehen, den Serienbrief noch mehr aus zu reizen und persönlicher zu werden, könnte man noch Partei spezifische Texte verwenden. Da ich aber nicht wirklich geübt bin im schreiben solcher Texte bitte das nachfolgende nur als Vorschlag nutzen.
Beispiele: SP: ... Das kooperative Denken und Gemeinschaftliche Entwickeln freier Software fördert die Reduktion der Abhängigkeit und gängeleien grosser Konzerne. Freie Software stärkt zudem die Position des Konsumenten gegenüber eines potentiellen Dienstleisters da eine höhere Vielfalt hilf genau die Software zu erhalten die man braucht. Sauber definierte internationale Standards in der Entwicklung und bei der Interaktion mit der Software garantieren langfristige Kompatibilität und fördern die Qualität bei Entwicklung und Dienstleistung.
FDP: ... eine Vielfalt freier Software erlaubt dem einzelnen selbstverantwortlich die Software zu verwenden die man möchte ohne in eine Abhängigkeit gezwungen zu werden. Gemeinschaftliches Arbeiten und Kontrollmöglichkeit durch das Volk erlaubt eine höhere Softwarequalität. Freie Software kann neue Märkte erschliessen, welche sich durch die geförderte Konkurenz in der Waage halten kann und dauerhafte Innovation fördert.
SVP: ... Freie Software hilf dabei sich vor allem in kritischen Bereichen von den ausländischen Grosskonzernen unabhängig zu machen. Durch Freie Software ist man als Nutzer in der Lage frei zwischen selbstverantwortlichem, eigenständiger Entwicklung und Unterhalt sowie bewusster Kooperation mit ausgesuchten Dienstleister zu entscheiden.
Am 02.06.2014 13:05, schrieb Marcus Moeller:
Am 02.06.2014 12:42, schrieb Marcus Moeller:
Am 02.06.2014 12:41, schrieb Michel:
Kleine Anmerkung
Sollte man nicht statt :
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie auffordern, sich in dieser Funktion über freie Software Gedanken zu machen.
besser:
Hiermit spreche ich Sie als Mitglied der Schweizer Regierung an und
möchte Sie bitten, sich in dieser Funktion über freie Software Gedanken zu machen.
Schreiben? Wäre etwas höflicher.
Klingt gut ;)
Was war eigentlich mit dem Rückantwortschrieb? Ich fände es eigentlich gut wenn man den Pact direkt unterschrieben in einen Briefumschlag mit Fenster stecken könnte, um ihn zurückzuschicken.
Andreas hat noch den Hinweis gegeben, dass den Term schweizer regierung kaum jemand nutzt, mitglied des bundesrates waer ueblicher.
Viele Grüsse Marcus
Grüsse Michel
Am 01.06.2014 16:10, schrieb Elias Diem:
Hoi zäme
On 2014-05-31, Urs Fässler wrote:
Im Anhang die aktuelle (nicht fertige) Version.
Danke Urs!
@Alle: Sollen wir noch einen vorgefertigten Antwortbrief beilegen um das Rücksenden so einfach wie möglich zu machen?
Würde ich machen. Aber das gibt zusätzlichen Aufwand.
Ich habe das Anschreiben gemacht. Es ist beigefügt. Bitte schaut es an und gibt Feedback.
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Ciao
Regierung ist nur der Bundesrat. National- und staenderat sind Parlament. Der vollständigkeit halber: kantonale und kommunale regierungen und Parlamente heissen sehr unterschiedlich, werden aber i d r auch mit ihren richtigen Namen verwendet.
Cu Andreas
Hallo,
Michel ke-mi@bluewin.ch writes:
Bundesrat aber nur, wenn damit die Sieben gemeint sind. Ansonsten schreibt man explizit vom National- bzw. Ständerat. Das wäre dann noch ein Feld, dass sich automatisch ausfüllen liesse.
Sehe das auch so. Hier noch die offiziellen Anredeformen (http://www.vtg.admin.ch/internet/vtg/de/home/themen/internationale_kooperati...)
Sollte der Bedarf bestehen, den Serienbrief noch mehr aus zu reizen und persönlicher zu werden, könnte man noch Partei spezifische Texte verwenden.
Ich würde es nicht parteispezifisch machen.
Gruss Giammi
Habe "Schweizer" aus dem Brief entfernt. Antwortbrief ist auch drin, so dass das ganze doppelseitig ausgedruckt werden kann.
@alle: ich brauche noch einen schlauen Text für den Antwortbrief. @Marcus: ich brauche noch dein ok für die EMail-Adresse und Positionierung der Adresse.
Am 02.06.2014 20:52, schrieb Urs Fässler:
Habe "Schweizer" aus dem Brief entfernt. Antwortbrief ist auch drin, so dass das ganze doppelseitig ausgedruckt werden kann.
@alle: ich brauche noch einen schlauen Text für den Antwortbrief. @Marcus: ich brauche noch dein ok für die EMail-Adresse und Positionierung der Adresse.
eMail ist ok. Den Namen unter 'Freundliche Grüsse' würde ich auch ganz links positionieren.
Viele Grüsse Marcus
PS: reply-to-list ist jetzt default behavior.
Hoi zäme
On 2014-06-02, Urs Fässler wrote:
@alle: ich brauche noch einen schlauen Text für den Antwortbrief.
Wie wär's damit?
<antwort> Hiermit sende ich Ihnen die ausgefüllte zweite Seite zurück. </antwort>
Jetzt müssen wir aber noch die Reihenfolge der Seiten ändern! Also schauen, dass die Antwortseite wirklich die zweite Seite ist. Darauf wird auch schon im Anschreiben verwiesen.