Hallo Liste,
ich habe gerade eine Datei mit einem Formular als Microsoft InfoPath Datei erhalten die dann in Zukunft als Standard für alle Netzwerkteilnehmer von über 40 Hochschulen, Unikliniken und Kommunen dienen soll. InfoPath wird für die Erstellung von XML-basierten Formularen verwendet. Diese Datei kann ich unter Linux nicht öffnen. Obwohl ich mich mit *.doc und *.xls aus der Windowswelt wohl oder übel anfreunden musste und das unter Libre-Office ja auch kein großes Problem ist, möchte ich verhindern das hier ein weiteres nicht offenes Dateiformat Standard wird. Als Geschäftsstelle habe ich da auch eine gewisse Einflußmöglichkeit. Es muss also eine Alternative her und zwar eine die sowohl unter Windows als auch unter Linux funktioniert. Dabei ist mir bekannt das man Formulare auch mit Open-Office, bzw. Libre Office erstellen kann. Aber da die meisten schon Mikrosoft Office auf Ihren Rechnern haben, ist das keine wirkliche Alternative. Am besten eine die auf den Webbrowser aufsetzt, denn in den Hochschulen und Kommunen haben die Nutzer meist keine Möglichkeit Software auf Ihren Rechnern zu installieren. Die Infrastruktur in Form eines Linuxservers für die Bereitstellung der Infrastruktur und dem Speichern der Daten ist dafür vorhanden. Nach meiner Recherche lehnt sich InfoPath dem W3C-Standard "XForms" an. Das sollte mit XHTML 2.0 auch im Web Standard werden. XHTML 2.0 wurde aber niemals Standard, dafür aber HTML 5.0. Diese Info brachte aber mehr Verwirrung als Klarheit.
Ebenso wäre eine Argumentationshilfe für den Gebrauch von offenen Formaten im öffentlichen Dienst hilfreich und ich weiß, dazu gibt es was, ohne es für den Augenblick genau benennen zu können. Eine Suche hierzu blieb aber bisher erfolglos.
Kennt jemand eine Bowser- oder Serverbasierte Alternative zu dem Formularprogramm Microsoft InfoPath ? Gibt es ein verbindliches Dokument oder eine Empfehlung einer öffentlichen Stelle zu Benutzung von offenen Dateistandards im öffentlichen Dienst?
Gruß
Christofer
Hallo alle,
On Tue, Apr 10, 2012 at 01:38:09PM +0200, Christofer König wrote:
Gibt es ein verbindliches Dokument oder eine Empfehlung einer öffentlichen Stelle zu Benutzung von offenen Dateistandards im öffentlichen Dienst?
Schau mal in den Migrationsleitfaden: http://www.cio.bund.de/DE/Architekturen-und-Standards/Migrationsleitfaden-un... Ab Seite 9 ist da u.A. die Definition Offener Standards der FSFE zitiert, die auch zur Grundlage der Definition im Leitfaden genommen wird.
Viele Grüße Michael
A propos Infopath: So viel ich weiß, ist das nur mächtig im Zusammenhang mit Microsoft Sharepoint (die nächste Abhängigkeit...)
Hallo nochmal,
On Tue, Apr 10, 2012 at 01:38:09PM +0200, Christofer König wrote:
Kennt jemand eine Bowser- oder Serverbasierte Alternative zu dem Formularprogramm Microsoft InfoPath ?
Laut https://en.wikipedia.org/wiki/XForms gibt es da ein paar alternative Implementierungen, u.A. OpenOffice.org. Siehe auch http://www.w3.org/MarkUp/Forms/
Viele Grüße Michael
Michael Kesper schrieb:
On Tue, Apr 10, 2012 at 01:38:09PM +0200, Christofer König wrote:
Kennt jemand eine Bowser- oder Serverbasierte Alternative zu dem Formularprogramm Microsoft InfoPath ?
Laut https://en.wikipedia.org/wiki/XForms gibt es da ein paar alternative Implementierungen, u.A. OpenOffice.org. Siehe auch http://www.w3.org/MarkUp/Forms/
Es gibt auch Browser-Plugins, sodass XForms direkt im Browser unterstützt wird, zum Beispiel für Firefox und SeaMonkey:
https://addons.mozilla.org/de/firefox/addon/mozilla-xforms/
Ich habe damit mal gearbeitet, das funktioniert recht gut. Schade, dass das kein offizieller Bestandteil der Browser ist, aber das kommt vielleicht noch.
Gruß Volker
Christofer König:
Kennt jemand eine Bowser- oder Serverbasierte Alternative zu dem Formularprogramm Microsoft InfoPath ?
Hallo Christofer,
mir wird aus Deiner Beschreibung nicht ganz klar, welchen Zweck Infopath erfüllen soll. Dementsprechend ist es schwer, Alternativen zu benennen. Es erscheint mir aber überhaupt ziemlich sinnentleert, bei jedem Benutzer eine spezielle Software vorauszusetzen, nur damit Formulare ausgefüllt werden können. - Es sei denn, es geht darum, ein Monopol aufrecht zu erhalten.
Denn auch ohne XForms kann man mit HTML(5) (+ Javascript) beliebig mächtige Formulare erstellen. Diese Formulare können dann auf einem zentralen Server liegen und beliebige Funktionen erfüllen. Der Benutzer braucht nur einen Browser. - Wenn das nicht gehen sollte könnte man auch HTML Dateien, eventuell auch mit eingebettetem Javascript verschicken, die nur geöffnet werden müssen und ausgefüllt werden können.
Ich weiss nicht genau, ob das Wollmux System aus München vielleicht auch eine Alternative wäre? http://www.wollmux.org
Gruß,
Thomas Koch, http://www.koch.ro